•  Barbeques are designed for outdoor use only
•  Check local Fire regulations for applicable installation or use bilaws
•  Barbeques must be installed on firm base capable of supporting unit weight
•  Should not be installed on wooden decks
•  Cement or mortar finish is recommended
•  Follow instructions provided with unit

Check local fire regulations for allowable distance from building structures and trees

Where there are no regulations, we recommend a minimum distance of 6 Meters from any tree or building to the the chimney outlet. Also included with your Zefirro Barbeque is a front and Chimney Spark arrester, these are included to keep sparks/burning embers from leaving the firebox. Check with you local fire marshal for local regulations

Assemble barbeque on a solid, reinforced base 

Zefirro barbeques are very stable but must have a solid foundation and a cement or properly installed interlocking stone is recomended. Unstable locations such as grass or patio stones WILL cause unit to become unstable. This situation could pose a risk due to tipping and could damage the location and persons around it should it not be able to stand firmly. The manufacture is not responsible for damage to location or persons due to improper installation or poor location structure. Zefirro Barbeques are not to be installed on wooden decks.

Assembly 

Follow instructions included with barbeque as each unit will have a slightly different order. Assure that the reinforced base you are assembling your Barbeque unit on is level and that each component assembled is leveled as you build. This can be achieved with cement. Carefully disassemble your the pallet and protective coverings that the unit was shipped in assuring that when you remove strapping, a component does not fall away from the pallet. Assemble components in numerical sequence as identified in the instructions with each component being leveled as you build. Once your Barbeque is completely assembled, we recommend you fill any imperfections with the sealing paint provided and then completely seal the unit with sealing paint provided.

Stone effect Table Tops

If your unit comes with a stone effect table top, it is important to prepare and seal the top to keep it from absorbing elements from barbequing or the elements (water stains, bird droppings etc.). Once final assembly is complete and Stone Effect table tops are installed and completely dry, thoroughly clean top with steel wool, dust off and apply first coat of sealing compound (fluid provided) with a paint brush or dry cloth. Once first coat is completely dry, re-apply second coat for polished effect. Sealing compound should be applied at the start of every season.